Mingtai 3000 series aluminum plate for sale

3000 series aluminum plate, also known as deformed aluminum and aluminum alloy, 3104 aluminum alloy, American deformed aluminum and aluminum alloy. The 3000 series of “aluminum-manganese alloys” are widely used in buildings. Among them, alloys 3003, 3004, 3005, 3103 and 3105 are widely used because the content of manganese in the aluminum-manganese alloy is stable at its saturation point. Nearby, in combination with other metals, 3000 series aluminum alloys have suitable elongation, good corrosion resistance, good processing properties, and can be smelted into alloys of different hardness according to different application requirements.

Mingtai is a manufacturer specializing in the research and development of aluminum profiles, mainly engaged in the production and sales of 1 series-8 series aluminum strips. Covering an area of 250,000 square meters, it has 6 continuous casting production lines, 10 continuous rolling production lines and 44 other large processing equipments with an annual output of 600,000 tons. It has 6 semi-continuous casting production lines, 10 continuous rolling production lines and 44 other large processing equipments with an annual output of 6 million tons.

Please pay attention to our website for more details.

https://www.mt-aluminum.com/category/products/aluminium-plate

Mingtai 2024 aluminum plate for sale

2024 aluminum plate product introduction

2024 aluminum plate has high strength and has certain heat resistance and can be welded.

2024 is a typical hard aluminum alloy in the aluminum-copper-magnesium system, which has reasonable composition and good comprehensive performance. This alloy is produced in many countries and is the largest used in hard aluminum. The alloy is characterized by high strength and a certain heat resistance, and can be used as a working part below 150 °C. The temperature is higher than 125 ° C, and the strength of the 2024 alloy is higher than that of the 7075 alloy. The forming properties are better in the hot state, annealing and new quenching conditions, and the heat treatment strengthening effect is remarkable, but the heat treatment process is strict. Corrosion resistance is poor, but it can be effectively protected by coating with pure aluminum; it is easy to crack when welding, but it can be welded or riveted by special process. Widely used in aircraft structures, rivets, truck hubs, propeller components and other structural components.

Typical use

2024 is mainly used to make various high-load parts and components (but not including stampings forgings) such as skeleton parts, skins, partitions, ribs, spars, rivets and other working parts below 150 °C.

If you are interested, please contact us in time:

https://www.mt-aluminum.com/2024-aluminum-plate.html

2024 aluminum plate

2024 aluminum plate is a kind of high-strength hard aluminum. It is an Al-Cu-Mg-based aluminum alloy. It is mainly used to make various high-load parts and components. It can be heat-treated and strengthened. It is medium-plastic in quenched and quenched state.

Main features and application range: This is a kind of high-strength hard aluminum, which can be heat-treated and strengthened. It has medium plasticity in quenching and quenching conditions. Spot welding is good. There is a tendency to form intergranular cracks during gas welding. The alloy is quenched and After cold work hardening, the machinability is good, and the machinability is low after annealing: the corrosion resistance is not high, and the anodizing treatment and painting method or the surface of the aluminum layer is often used to improve the corrosion resistance. Uses are mainly used to make a variety of high-load parts and components (but not including stampings forgings) such as skeleton parts, skins, partitions, ribs, spars, rivets and other working parts below 150 °C.

Mingtai is a manufacturer specializing in the research and development of aluminum profiles, mainly engaged in the production and sales of 1 series-8 series aluminum strips. Covering an area of 250,000 square meters, it has 6 continuous casting production lines, 10 continuous rolling production lines and 44 other large processing equipments with an annual output of 600,000 tons. It has 6 semi-continuous casting production lines, 10 continuous rolling production lines and 44 other large processing equipments with an annual output of 6 million tons.

Please pay attention to our website for more details.

https://www.mt-aluminum.com/2024-aluminum-plate.html